Plastic windows: Winter adjustment

You put a modern double-glazed glass and think that with the preparation of windows for the winter end? No matter how! You need to adjust the window. Fortunately, it is easier to make it, than to flick windows for the winter

Compared to its wooden predecessors, modern plastic windows can be considered a complex mechanism requiring the appropriate setting and due. This article will not have a word about production or installation of such structures, since all this has many publications. Today we suggest talking about how and how to insulate plastic windows for the winter.

Why regulate windows?

Yes, it turns out that even such a modern window device needs additional thermal insulation. Fortunately, it usually comes down to the use of the opportunities that initially eat each metal-plastic window, and which very few users know about.

What are you talking about, you ask? On the setting of plastic window structures for their preparation for the upcoming wintering.

No need to wonder if you read about it for the first time. Yes, and think than to flip windows for the winter either should not, since PVC products do not need to be saved with paper or scotch. They are adjusted to adjust enough, and to provide the maximum clad to the coax.

Good, and why all this was not done immediately? Everything is simple: plastic window structures have a pair of application modes – «Summer» and «winter», What gives them the opportunity to extend the useful life of the factory seal. If you continuously keep the sash in mode «summer» or «winter», then the sealing gum quickly flashes, forming drafts.

Configure on winter way

So, in order to thoroughly understand how the plastic windows are configured for the upcoming winter, you just need to look at the end part of their sash, where you can detect locking elements.

The latter are usually represented by cylindrical moving parts that fix the sash in the closed position by entering the appropriate window frames. If it seems to see the designs in more detail, then the same cylinders can also be seen on the top, and on the lower ends.

With a more detailed study, it turns out that cylinders are eccentrics, and the position of the eccentric guarantees the maximum possible or simply dense adherence. Their design provides for extensions opposite the endings of bands passing through their end.

So, plastic windows are ready for cold, and the adjustment for the winter can be considered over when all these extensions and technological lines «Watch out» outside. Taking a similar position, the window sash is much more densely to immediately. Last and does not allow cold air from the outside.

It is clear that the adjustment of metal-plastic windows for the summer implies the change in the direction of the eccentrics, in which they will be directed along the sesters.

To insulate the designs in this way and give to the eccentrics the required position, you need hexagons, although everything can be done and fingers.

Some subtleties

It is worth noting that in rare cases, the self-warning insulation of plastic windows for the upcoming winter can be complicated by a non-standard set of fittings, and, more precisely, the absence of cylindrical eccentrics. You do not need to worry and think that the insulation of such a priori designs is impossible.

Most likely, the sash can still be customized and press, but for this you have to study all the existing blocking elements, and understand the principle of their work.

It is possible that the position of the assistant to study on the rollers on the Internet, which is laying out the manufacturer of your brand of windows, or contact the dealer who sold them and installed them.

To adjust the plastic windows to any mode, whether winter or summer, It took place without damage to the seal, it is recommended to occasionally cover silicone-based lubricant. It can be purchased at gas stations or in any economic store.

About what «crying» window

Searches for answering the question, why so sincere «crying» Plastic windows in winter, worries the overwhelming majority of PVC designs.

In addition to the banal and quite understandable problem of a sharp drop, existing between the inner and external temperatures, the window «crying» also for such reasons:

• Factory faults and errors made during installation;
• Critical and just high humidity in the room;
• Weak heating, unevenly distributing heat;
• Worn spare parts, neglect of the rules of use and defective exhaust system.

Winter and autumn «cry» It can be prevented even at the stage of ordering and installing structures, for which it is enough to make the following non-hard steps:

• Put a double glass of two glasses with an energy saving effect;
• Apply in a double-blade frame from PVC;
• Isolate slopes;
• Mount the trim valve;
• Fill the argon window and make the windowsill as wide as possible so that it blocked the battery.

In the event that the problem is why «sob» The windows does not solve any elementary setting, you need to call a specialist who will advise to do as follows:

• Change, customize, revise or repair existing fittings;
• Put additional elements that provide ventilating;
• Replace the seal;
• Fix the installation errors up to the window dismantling;
• Compact and insulate the mounting seams;
• Configure clamping details;
• Change the glass itself.

If you fulfill all the above, the frost will quickly stop drawing your «Patterns» on the glass, and in the house will be tangible warm and comfortable.