Learning correctly stroking shirts with iron and without it
How to stroke a white cotton shirt? What to do if there is no iron, and you need to stroke the shirt? Like a shirt to stroke the sleeves and collar?
It has long been known that the first impression of a person is created by his appearance. People dressed in expensive, but climbed clothes, look sloppy and do not cause confidence. So going to an important meeting, it is necessary to take care of your appearance. Shirt is an integral part of a business suit.
At first glance, stroking her is easy, but, as in any other case, there are their own nuances. If you do something wrong, you can not only spoil the impression of the meeting, but the material itself is sewn.
Where to start?
How to iron a shirt? The process itself does not take much time, but it is necessary that everything is necessary at hand.
Besides the iron, you will need:
- Ironing board or smooth solid surface;
- Sprayer with purified water;
- Cotton towel, you can use it when ironing sleeves.
To the choice of iron it is necessary to approach. If there are options, the preference is given to the models equipped with a power regulator, with a steam supply system and a good sole. Iron weight on iron process does not particularly affect.
Before you begin work, you must get acquainted with the product label. It usually indicates at what temperatures a shirt can be stroke. For cotton it is necessary to use a high temperature (1500) and steam if polyester added, the power switches to the lower (1100). Viscose fabric stroke at 1200, and flax at 2100 degrees.
How to quickly stroke the shirt? You can create a double ironing effect. To do this, the surface of the ironing board is wrapped with food foil, and top covering it with a substrate, the clothes will calm down at once from two sides. This method is suitable for dense tissues that are not afraid of high temperatures.
If everything is ready, then it’s time to find out how to stroke the shirt?
Smoothing sequence of folds on a shirt
Shirts correctly stroke in a wet state, in a rid of the way to get rid of the folds will be more difficult. Work occurs in the following order: collar / cuffs, sleeves, right / left shelves and spin.
In fact, it does not matter what to smoke, each person can work out its algorithm. Before starting work, experts advise to moisten the fabric using a pulverizer, but you should not do it with a wicc coach, t.To. Layouts may remain.
Collar – the most visible part of the shirt, it does not hide it, it is always on top. In some cases, it can be limited to smoothing it and cuffs, but this is if a person does not plan to undress and is very in a hurry. How to stroke the collar in the shirt quickly and efficiently? First, it is folded on the chalkboard face down.
Moching the collar well, slowly spend iron from one edge to another, carefully irripating all the folds. If the bend appeared, then they are cleaned down, to the ground. After that, turn over the shirt and with the Iron, roll up the collar with the front side.
Cuffs are unbuttoned and folded on a solid surface. First stroke the inner side, then face. Folding folds drive to the edge. If the french cuffs (cufflinks instead of buttons), then the edges should not be very ironing, it will break their smoothness.
How to stroke sleeves shirts? Do it need so that no extra arrows and bend. The sleeves are twice as well, the seam is taken behind the landmark. First, it is placed in the center and smoothed, then move to the edge and gently spend the hot-sole of the iron on the fabric.
So that everything is right, they start up from top to bottom, from the seam to cuffs, on both sides. The sleeves are conveniently reclocked on a special ironing board, with its absence, use the towel twisted in the harness, it is put inside.
Do a central arrow or not, each decides individually, depending on the requirements of fashion and style shirt. To get it the sleeves are twice, seam below, then the top edge neatly stroke the iron.
Front shelves start right to iron from buttons. The fabric is neatly decomposed on the board, rush to water and stroke up from top to bottom. Never stroke on top of buttons, only around. Next, go to the second front shelf, spending the same manipulation with it. To stroke the right pocket, the iron is carried out from its lower edge to the top, appropriate enough.
The latter smoothed the back of the shirt. She is unlikely to fully fit on the ironing board, so they are moving in 2-3 closures. First smooth the coquette or gluke part of the shirt, then smoothly descend the book. Carefully move the material, lowering the stroke part to the edge. If there is a fold in the center of the back, then it must be disappeared and rod.
Here’s how you can stroke cotton shirts and shirts from other materials. At the end of the process, it will correctly hang a shirt on the shoulders and give her a little «coolet».
How to stroke shirts without iron?
For those who do not really love «stand» Near the iron can be advised to take advantage of other techniques for smoothing folds. The simplest thing is not to hit the shirt during washing. To do this, you need to completely refuse to push up or do it on small turns. After that, the product is hanging on her shoulders, roll up and leave so complete drying.
Will help smooth out folds and drying on yourself. To do this, the shirt should be sprinkled with water from the sprayer, put on yourself, tallying the sleeves, and walk around the room. Do these manipulations need half an hour before the exit. During this time, the cloth will dry and smooth.
You can dump things with hot water. Shirts put on the hanger and fix in the bathroom so that it hangs freely, but at the same time they did not get droplets. A hot crane opens and a jet goes on the wall up. For a while you can forget about the shirt. After 5 minutes it is removed and put on the body. Another quarter will go dry and everything is ready. Quickly and without much costs.
So it is possible to iron white and colored shirts, the main thing is that the latter do not learn. Although it is still used to use the iron.
Tips finally
It is necessary to iron only pure shirts and do it better until they are not quite dried. If the fabric is dry a bit, it is best to use a steam iron. So that the collar holds the shape, the starch spray is pre-applied to it. It is more convenient to try at once a few things, then for every day you will have a clean finished shirt.
How best to stroke a white shirt? Just as color, observing the temperature modes indicated on the label. If the sole leaves the traces, then for preserving cleanliness, the shirt is stroked through a wet fabric.
To the face always clean and did not leave traces on clothes, water from the iron should be merged after each application. Periodically, the holes for the release of the steam are cleaned with the help of vinegar and water (1: 1).
To form a couple, it is best to use purified water from the filter. With such departure, the iron will last long, and your clothes will always be well-headed.
