How to clean the iron at home from scale and prigar – instructions for hostesses
Clean iron at home. Read how to clean the iron from screaming, how to clean the iron from Nagara. If you do not know how to clean the sole of the iron and how can I clean the iron inside – read home reviews on Lady-Magazine.Com
Flaw on the sole and scale – the most frequent problems with the iron arising from both the intensity of the use of the device and the illiterate appeal with it. For example, from improper use of temperature modes. With self-cleaning, the main rule is not to rearrange, so as not to spoil the technique.
See also: How to choose an iron for home – hostess council.
How to do it right and what are the methods of cleaning the iron?
How to clean the iron from scale – cleaning iron from scale at home
The main reasons for scale in the holes of the Iron soles are tough water that we pour into the device.
See also: How to clean the burnt saucepan – the best home methods.
How to get rid of scale?
- Lemon acid. Dissolve in hot water (1/2 cup) 2 h / l of acid, moisten in this solution gauze and pave it into the holes. After 5-10 minutes, the gauze remove and turn on the iron – the most effectively scale is removed when exposed to high temperature. The remaining scale can be removed with a cotton stick.
- Similar to the previous recipe – using vinegar and lemon juice. True, it will have to suffer not the most pleasant smell of combustion of organic substances.
- Great help can also have Funds from scale, which are designed for dishes.
- Concerning Shopping Machines – their choice today is quite wide. More efficiently German cleaners with additives that are perfectly removed scale and protect metal. Should act according to the instructions.
- Use exclusively Purified (or distilled) water for iron – so you will extend his service life. But to start carefully read the guide to the iron – for some models, it is impossible to use distilled water.
- If available Self-cleaning system, You should fill the instrument container with water, set the maximum temperature, turn on the Iron itself and wait for an automatic shutdown. After that, repeat the procedure.
- Folk method using Celenty Cillit. Of the one who is removed rust and fall. Preheat the iron, disconnect from the network, put up the sole and gently yell in its holes. Speaking dirt collect with the help of a sponge after 10-15 minutes, after which we rinse the device outside and inside. Do not forget about precautions.
How to clean the iron from Nagara – removing the head of the Nagar with folk remedies
If a favorite iron begins to spoil things, leaving dark traces on them, and complicates the ironing process, it means it is time to clean the sole of the device from Nagara.
See also: How to choose the right to choose a home ironing board – Types of home ironing boards.
How can I clean?
- Special Pencil for Nagar Removal (Finding it in stores is easy) – one of the most effective means. Preheat the device, turn off and soda the sole of the pencil. Softened Nagar You can quickly remove with a dry cloth. The smell will not be the most pleasant, no harm to health. After cooling the iron wipe the base with a wet cloth.
- Hydroperitis. The principle of cleansing is similar to the previous. Enough tablets-two. As for the smell and gas release under the procedure – for this option, good ventilation is required. After detachment of pollution, remove the balances of the car with a wet cloth and wipe dry.
- Table vinegar. Soak with this means a coarse cloth (like a waffle towel), quickly remove the contamination on the disabled device. For efficiency, you can add to vinegar ammonia. Attempt failed? Heat the iron and swallow the fabric pre-dipped in this solution. Do not forget about ventilation. If the vinegar is not available, suspicion is enough.
- Salt of fine grinding. This option is not suitable for instruments with teflon coating. For cleansing you need to pour a thick salt layer on clean x / b fabric and spend the heated iron on this layer several times. You can mix salt with candle paraffin (in advance crushed). Just remember that when using paraffin, you need to tilt the device in order to paraffin did not hit the steam holes.
- If the nagar appeared from synthetic tissues, you should warm up the iron and after it is turned off to delete these traces from the melted synthetics Wooden subject.
- Looking for the least dangerous cleaning method? Then you can mix Food soda with dishware, distribute the mixture on the sole and in a few minutes to intensively wipe the base to its full cleansing. After – wash and wipe the dry cloth.
- Hydrogen peroxide. Moisten cotton peroxide, wipe the sole of the iron.
- You can also use Toothpaste or powder for washing dishes. Only after purification should be rinsed with water base and wipe dry.
- You can apply I nail polish remover. But only in case your device is not with teflon, enamel or sapphire coating.
And of course, remember the preventive measures. I.e, Follow the recommendations of the manufacturers, Use the correct temperature modes, do not clean the device with abrasives and metal sponges, and Timely clean his sole Soft wet cloth.
