How to be fashionable: dresses with a peasive cut

Want to sew a spectacular dress? Then our article is exactly suitable for you! Here you can find out how to sew a completely stunning dress with a peasive cut with your own hands

Today on the shelves in stores you can find almost any style and type of clothing. But what to do if you are a happy owner of a non-standard figure or you just don’t taste everything you have time to see in the store. It was for you that we wrote this article.

And today we will meet with one of the ways of cutting dresses and a blouse from knitwear – Crooked Crow. First of all it is worth saying that this type of clothing creation with your own hands is perfect for lovers to make everything quickly and beautiful.

Here you do not need long and tediously count everything to the last swallow. Sew similar models are very simple and fast, the only thing that problems may arise – this is the calculation of the size.

But even if you have the most simple mathematical services, you have horror, then you should search in the endless depths of the World Information Network Sites, in which, thanks to special services, you can automatically calculate all the parameters of the future pattern. To do this, you just need to enter all the necessary parameters of your figure in a special name plate. 

Where to begin?

Practice shows that it is best for such dresses to use knitwear, since such a fabric can gently lie on your figure. Yes, and to the body such fabric is very pleasant. 

Attention! If you are new to sew and hope that the finished pattern from the magazine will suit you, then it is in vain! Many people think: «What to recalculate there, if something is wrong – the fabric stretches a bit and everything will be fine!» But not everything is so simple!

Your appearance will depend on the correctness of modeling. And if we love yourself, then we must have everything better. So it is not necessary to hope that the specifics of the fabric will correct all your errors, better try and correct the pattern to yourself. 

And one more thing: before starting to simulate the pattern, be sure to fit the hover. The snag is that knitwear, as we said, has the property to stretch. And if you make the bottom of the dress too narrow or wide, then your appearance will wish to desire the best.

It is necessary to measure as follows: Take a piece of knitted fabric and simply wrap it around the honey. The fabric should not be stretched, but also to allow the improvised skirt to slip too.

The main thing is to be comfortable. Well, of course, do not forget that every woman should be beautiful, so no eaves! 

How to Build Pattern: Pershed Cra

Before we start to create, let’s figure out what the key feature of this type of cut. First of all it is worth saying that with the usual method of cutting, you will place a fabric for the pattern perpendicular. But the cut-off to the cut is quite another matter.

Here you need to start lining, placing the fabric on the pattern horizontally. Using such a pattern with a skewed cut, you will get a very original thing with elements of drapery, which will allow you to hide some flaws of the figure, if such takes place. 

And today we will explore one of the options for the patterns of dresses with a catched Croem. It is also worth noting that the recognized fan of the dresses of such a model is the famous designer and fashion model Vivien Westud. And believe me, a dress with a peasive cut from Vivien Westwood is a benchmark of fashion in the world. 

Dress with Potrested Crow: Step bypass Instructions

Now we will present you the pattern, with the help of which you can sew a dress if your size falls into the gap between the fortieth and fifties. If you are a little more or thin, you will need to recalculate all the designations, taking into account your sizes. 

Note: And the front, and the back of our dresses with you are absolutely the same. That is why you can simulate the pattern immediately on the fabric you need to pre-fold twice. Fabric width must be 150 centimeters. 

So, proceed:

• In the upper right corner of the fabric, we put the point A and lay down from it down 115 centimeters. Remember that all lines must be smooth and perpendicular to each other. Below we put the point in. From this point, we postpone 75 centimeters to the right and get a point B1. The distance from B1 to A1 is 115 centimeters, that is, equals the distance between the points A and B; 
• From point in direction to point and measure 93 centimeters and get a point with. From the resulting item with we measure the right distance, which is equal to half of your volume hip and get a point C1. Now from the point B1, I refue to the left of 3 centimeters and we have item B2. Up from point B2 need to measured 70 centimeters. So we will get a point D. The distance from B1 to B2 is the allowance for seam, so do not forget about it, otherwise our dress will be a little already conceived. Now we need to connect points C1 and D to each other. But it is necessary to do not exactly, like under Lineshka, and a smooth line. So we got the neck of our dress;
• Then we will define the length of the sleeves. To do this, measure 40 centimeters from point d down. We got point d2. From her right to refue 3 more centimeters and we have a point d1. Now from C1 we carry out a straight line perpendicular to the segment of the BB1 ​​and get the C2 point; 
• In order for our sleeve to be completed with you, you need to postpone from the point C2 a small segment left, the length of which should not be more than 3 centimeters. So we got item B3. Point C3 You must accommodate arbitrarily, because the degree of improving the sleeve depends on its height. So think carefully! Now we need to connect the smooth line of the point B3, C3 and D2. Make it as shown in the picture. If you do a flat line, it does not work in any way, you can use special patterns for drawing.

Returning to the top of the pattern. From the point and measure 10 centimeters to the right and put the point A2. Then connect it with C1. This line must also be smooth, but not so curved, as when creating an element of the pattern of the sleeve. Here we have a pattern. But, where, ask you to make seams and bends? Now we will tell you! 

Cut AB is a direct flavor fold; C1 D – neck; A2c1, dd2, d2v3c3 – seams; BB3 – the lower part of the dress, it only needs to be understood so that the thread is not fringe. 

Looking at our pattern and finished dress, you can see that we missed a small detail, namely the cuffs. Make them very simple: you only need to cut two small rectangular slices of fabrics with parties 25 and 20 centimeters. And our cuffs are ready! 

And a little lifted in such models of waist, so if you are fundamental in such matters and thinks that everything should be clearly in place, you can neatly sew on the inside of the dress of a thin rubber. It will help hold the fabric on the bemps, not the portion of the general picture. 

As you can see, sew dresses on such a pattern is easy. And could you think that something beautiful dress in the first picture can be sewn with your own hands? And most importantly, you can change only the color and density of the tissue – and you will have dresses fashionable in any season! Good luck!